76/78/79 Land Cruiser Front Diff Guard – Housing & Ring Gear Protection

76/78/79 LandCruiser - Front Diff Guard – Housing & Ring Gear Protection

$90

Pay in 4 interest-free instalments with Afterpay · Zip available

AvailabilityIn-stock orders dispatch in 1–3 business days, usually within 24 hours. Not on the shelf? Allow 1–3 weeks.
Not sure what you need?Call 0421 382 071 — tell us your vehicle, lift and how you use it.

76/78/79 Series LandCruiser Front Diff Guard

Protects your housing and ring gear from the first point of impact.


On any track, the diff pumpkin is the first thing to make contact with rocks, ruts and obstacles it was never meant to. Factory axle housings are made from relatively thin material, and a single bad impact can dent the housing and potentially damage the ring gear.


This weld-on guard is designed to prevent exactly that, adding a heavy layer of protection to the most exposed part of your front diff. As a bonus, its profile makes the diff more skid-like and less of a hang-up point, with no sacrifice to ground clearance.


Construction

  • CNC-cut 6 mm mild steel
  • Supplied as a 4-piece flat-pack kit for welded installation


Preparing your flat-pack parts (plasma-cut edges)

Plasma cutting leaves a thin layer of nitride on the cut edge of the plate. For the best possible weld, this layer needs to be cleaned or ground off first. Left in place, it behaves much like welding over thin paint. Any welded options we supply are cleaned in-house before welding, and we recommend doing the same with flat-pack orders.


Installation notes

Because factory housings vary, this guard can be a little tricky to line up on installation, and some slight trimming may be required on certain housings.

When welding to any axle housing, take care to manage heat and avoid warping or bending the housing.

Prefer to have it fitted? We offer in-house installation on all our brace and guard kits. Contact us for a quote.


Frequently asked questions


Does this come welded or as a flat pack? This guard is supplied as a 4-piece flat-pack kit, ready for you (or us) to weld to the housing.


Do I need to prepare the parts before welding? Yes. Grind or clean the thin nitride layer left by plasma cutting off the cut edges before welding, as it otherwise compromises weld quality.


Why might trimming be required? Factory housings vary in shape and weld size, so some housings need slight trimming for a precise fit.


Can you install it for me? Yes. We offer in-house installation on all our brace and guard kits. Get in touch for a quote.

Complete the setup