80/105 Extended/Adjustable Rear Sway Bar Links

80/105 LandCruiser - Extended/Adjustable Rear Sway Bar Links

$850

Pay in 4 interest-free instalments with Afterpay · Zip available

Mount Location UNDER RAIL
AvailabilityIn-stock orders dispatch in 1–3 business days, usually within 24 hours. Not on the shelf? Allow 1–3 weeks.
Not sure what you need?Call 0421 382 071 — tell us your vehicle, lift and how you use it.

Want to get the most out of your factory rear sway bar? Look no further!!

In stock form, the factory sway bar links do their job. But once a lift kit & longer shocks are fitted, the links are pushed beyond operating limits, causing issues such as prematurely wearing bushes, bending/snapping links, or possibly even limitations on travel due to joint bind.

A lot of people believe removing the rear sway bar will improve off-road performance, but believe it or not, vehicle handling both on & off-road will actually be improved by keeping the bar in! (I know, right!) In short, this makes the vehicle more stable and predictable, and will help with unloading on side angles and climbs.


This 100% bolt in kit is designed to be the last set of links you buy for your Cruiser! No more snapped pins, no more bent links, no more replacing bushes, no more links binding!


Longer links (over twice the length of factory) with heims take care of all misalignment during the suspension cycle, meaning the links will never bind. This drastically improves joint lifespan over bushes, with far less restriction throughout the suspension travel. Left & right hand threads make for easy in-car adjustments.

New chassis mounting plates, CNC cut from 6mm mild steel, are designed to milk as much length out of the links as possible to give you the best result.

CNC machined stainless inserts for the bar mean you can remove that tiny little factory bush, slip these inserts in and bolt your new sway bar links in without a fuss.


For early vehicles or those with the sway bar bracket under the chassis rail, the kit will come with a bracket to suit, which simply retains the factory mounting holes/location for the chassis mount. Please select if you require this option when ordering. (Put simply, if your factory chassis mounts are on the side of the rail, select side of rail.) There is NO performance difference between the two mounting options. Both put the heim in the same location; it is simply so you can bolt your new mount into the required location.

The kit will suit any sized lift or shock length.



INCLUDES:

- x2 CNC Machined 7075 T6 Aluminium links

- x2 CNC Cut 6mm Mild Steel chassis mounts

- x4 CNC Machined Stainless Inserts

- x4 5/8" 3pc Heims & Spacers

- 1/2" Hardware


Please note:

Links now come with the flats and Rampt engraving as in the pictures.

Complete the setup