80/105 LandCruiser - Front Hydraulic Bump Stop Kit
Pay in 4 interest-free instalments with Afterpay · Zip available
Bolt in hydraulic bump stop kit for the front end of your 80 or 105 LandCruiser!
Designed to suit the Profender 2.0x2" threaded short body bumps. These mounts will locate your new hydro bump in the factory bump height position, with the possibility of 55mm adjustment down. This means you can tweak and fine tune your bump parameters on the front end of your rig to get the most out of your setup. (Need more than 55mm? Get in contact with us, as it can be done!)
100% bolt in design for the chassis. The diff requires additional plating to be welded onto the striker pad for sufficient strength. Plates are included in the kit, as well as the required hardware.
Hydro bumps are a perfect way to really dial in your suspension setup. Unlike rubber stops that can wear out over time, hydros are what we call a true bump, which means once set, they will continue to stop your up travel in that position. They also absorb this force much differently to a rubber stop. Traditional rubber stops build up energy when compressed. Once the compressing force has stopped, this built up energy in the rubber needs to be released, which in the application we're talking about means it pushes the diff back down. In the majority of cases with road going cars this isn't much of a problem, but for someone who likes to get their boogie on, this can emphasise the "bucking" feeling on hard bottom outs. (This is also one of the reasons why you see hydros on all of your favourite race cars.)
A hydraulic stop will absorb this energy without the rebound aspect, or at least with it drastically reduced. You can also tune how this happens by changing the pressure inside the bump, offering more or less resistance. This means these types of bump stops are perfect for anyone who likes to play on the hard side off-road, sees heavy loads, or a little bit of both.
We did say the mount for the chassis is 100% bolt on, but we do need to have a quick chat about the mount you're bolting it to!
Because the coil mounts in the front of the Cruisers take load forces from both the coil holding the weight of the vehicle and the bottom out force when you see full bump, the mount is unfortunately prone to getting a little bent. So we've decided to offer our Front Coil Braces as an optional extra in this kit. V2 of these braces has some extra meat around the outside edge of the plate, offering a bit more beef to the brace.
The best way to tell if you've managed to bend the front towers is by referencing the bump stop to the striker pad by lowering the car down onto full bump. The stops should land fairly central to the striker pad.
You don't necessarily "need" these braces to run the hydro kit. The factory bump stop is quite possibly going to be putting more force into the tower than a hydro will, but prevention is and always will be easier than cure!
Available as mounts only with the cans welded in, right through to a full kit.
CNC cut 6mm steel, powder coated satin black. (Custom colours available upon request)
KIT INCLUDES
*MOUNT ONLY OPTION*
- x2 left and right hand hydro mounts.
- x2 6mm CNC cut striker reinforcement plates
- Relevant hardware required
*MOUNTS & BUMPS
- x2 left and right hand hydro mounts.
- x2 6mm CNC cut striker reinforcement plates
- Relevant hardware required
- x2 Profender 2x2" threaded body Hydraulic bump stops
*MOUNTS, BUMPS & BRACES
- x2 left and right hand hydro mounts.
- x2 6mm CNC cut striker reinforcement plates
- Relevant hardware required
- x2 Profender 2x2" threaded body Hydraulic bump stops
- Front coil tower braces Left and Right.
FREQUENTLY ASKED QUESTIONS.
Q: Will these mounts suit other brand bump stops?
A: To our current knowledge, no they won't, as the body length and the thread both need to be the same for them to work.
Q: If my towers are bent, can they be fixed and run this kit?
A: Absolutely yes!
Q: Do the bumps come fully charged?
A: Yes they do. They come direct from the supplier, we don't open the box!
Pick up free from our Cardiff workshop, or choose delivery at checkout. Courier rates are worked out by weight and state. Kits, large items and orders over 50 kg are quoted once your order is packed, and ship once freight is paid. Smaller parts go by courier: QLD, NSW, VIC, SA & TAS 2–4 days, WA & NT 5–10 days. Large kits go by pallet to your nearest depot. Physical addresses only.
Change-of-mind returns within 30 days of shipping or collection, subject to a 20% fee. Made-to-order and custom parts excluded. Your rights under Australian Consumer Law are unaffected.
We ship worldwide. Email your address, phone number and parts list and we'll come back with a freight quote.
Complete the setup

Sale
Sale
Sale