80/105 Front Panhard Correction Bracket

80/105 LandCruiser - Front Panhard Correction Bracket

$185 $220 Sale

Pay in 4 interest-free instalments with Afterpay · Zip available

AvailabilityIn-stock orders dispatch in 1–3 business days, usually within 24 hours. Not on the shelf? Allow 1–3 weeks.
Not sure what you need?Call 0421 382 071 — tell us your vehicle, lift and how you use it.

As good as the Land Cruisers are from Mr Toyota's factory, some small improvements can be made!

This weld on bracket does exactly that!

Designed to tame out the small amount of factory spec bump steer from the original set up, by simply raising and slightly extending the mounting location of the Panhard on the diff end.

This puts the panhard more in line with the drag link reducing the effects of lateral sway on the steering system. Put more bluntly, as your front diff moves up and down, it moves in a side ways arc from the panhard. The arc size and orientation is dictated by the length and starting position of the panhard. If the arc is a different size or orientation to how the drag link moves, this has a pull/push effect on the steering. So when you hit a bump or divot on the road, the steering will pull/push to one side and then return again, hence the name bump steer! This bracket helps tighten the gap between the arcs of the two components reducing the bump steer and giving a much smoother happy feeling through the steering wheel. The slightly longer mounting position will also help improve the above mentioned.


You will also see a very small raise of the roll centre. Much like our rear riser bracket, this also helps with road characteristics.


Made from 6mm mild steel, bracket is supplied raw and fully welded ready to go with new mounting hardware. The nut on the backside of the mount is the same factory sized and pitched thread with a torque nut on it, offering way less chance of the bolt ever coming undone!


As mentioned above, bracket is a weld on item, and cutting of the factory mount is required for install. A small notch on the lower coil seat and platform is required to allow room for the nut, additional support offered by leaving the shorter M16 bolt supplied in the factory location.


If you have fitted or planning to fit a GU steering box, DO NOT fit this. Fitting a GU Steering Box puts the drag link on a more desirable angle as the Tie Rod End is now mounted on-top of the pitman arm and for the most part corrects the bump steer. Fitting this along with a GU Steering Box re-introduces the factory issue of bump steer.

76/78/79 owners need not apply! 
Due to a changed chassis panhard mount, this does not apply to you! 

Due to the longer mounting location, the factory panhard cannot be used. An aftermarket adjustable panhard is required to use the bracket, to our knowledge, pretty much any of the major brands out there will support your new mounting location.

Complete the setup