{"product_id":"80-105-land-cruiser-rear-long-arm-kit-corrected-suspension-geometry","title":"80\/105 LandCruiser - Rear Long Arm Kit – Corrected Suspension Geometry","description":"\u003cp\u003e\u003cstrong\u003e80\/105 Series Land Cruiser Rear Long Arm Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eA complete rear geometry solution — relocated upper and lower mounts, not just longer arms.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eThe 80 and 105 Series left the factory with genuinely good rear suspension geometry. This kit takes it to the next level: longer arms combined with relocated upper and lower link mounts to deliver the best all-round geometry achievable short of a full four-link — while retaining the main fuel tank.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eWhere most \"long arm\" kits only lengthen the lower arms, we also move the upper link mounts. That's what allows us to bring roll and flex steer to almost zero and dial in a far more effective anti-squat figure. The result is a rear end that bites and hunts for traction under power, instead of trying to drive under itself.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLifetime warranty against bending\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe've been manufacturing aluminium arms for over a decade, from the same grade material used throughout our buggies and race cars. We stand behind them completely: if you bend one, we'll replace it. (We will want to understand how and why — but that's a conversation we've yet to need to have.)\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngineered around the geometry that matters\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUpper \u003cem\u003eand\u003c\/em\u003e lower mounts relocated for optimised instant centre, anti-squat and near-zero flex steer\u003c\/li\u003e\n\u003cli\u003eFully adjustable, high-strength links\u003c\/li\u003e\n\u003cli\u003eHeavy-duty lower link chassis mounts built to take repeated hard landings\u003c\/li\u003e\n\u003cli\u003eDesigned to work around the main fuel tank — no compromise to fuel capacity\u003c\/li\u003e\n\u003cli\u003ePairs with our rear Panhard Riser Bracket and extended Panhard for a fully corrected rear end\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProven durability\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur original 80\/105 prototype lower arms, running FK heims, are now over 2.5 years and 38,000 km old. Both bush and heim remain in perfect working order with no measurable wear — meaning no cycle of replacing worn bushes every few months, even under frequent off-road use.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLinks 300 mm longer than factory, machined from 2\" 7075-T6 solid aluminium\u003c\/li\u003e\n\u003cli\u003eGenuine Toyota bushes at the diff end\u003c\/li\u003e\n\u003cli\u003e1.25\" heim joints at the chassis end (DFI 3-piece or FK), with misalignment spacers to retain the factory bolt size\u003c\/li\u003e\n\u003cli\u003eLower link chassis mounts: CNC-cut 6 mm mild steel, supplied LH\/RH pre-welded\u003c\/li\u003e\n\u003cli\u003eUpper drop brackets: CNC-cut and folded 4 mm mild steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit includes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2× lower link chassis mounts (LH\/RH), pre-welded\u003c\/li\u003e\n\u003cli\u003e2× dropped brackets for the chassis upper mounts\u003c\/li\u003e\n\u003cli\u003e2× longer lower links with genuine bushes, your choice of DFI 3-piece or FK heims, and misalignment spacers\u003c\/li\u003e\n\u003cli\u003eAll relevant mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eMounts only\u003c\/em\u003e — select this option if you require the mounts without the links\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eBush\/bush\u003c\/em\u003e — available on request, though we recommend against it. The heim\/bush combination lasts longer. and performs significantly better.\u003c\/li\u003e\n\u003cli\u003eUpper Link Drop Brackets Only — For cars with Long Arms already intalled. These drop brackets are designed to work with our kit, correcting the poor anti-squat geometry introduced by only lengthening the lowers. It is your responsibility to ensure these will work for your application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInstallation is straightforward; the most involved part of the job is dropping the fuel tank. The upper drop brackets slip over the factory chassis mounts and self-align via the bolt holes. The new lower chassis mounts self-align vertically and horizontally, located by a simple forward measurement from the factory lower mount.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eImportant: the drop brackets must be welded. The bolt-on feature is provided purely to establish correct location prior to welding.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLead time\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNon-stocked items: allow 1–3 weeks.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between DFI and FK heims?\u003c\/strong\u003e Brand and quality tier. DFI are a quality 3-piece heim that reliably do the job they're built for. FK are regarded as the best quality available worldwide.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the fuel tank be refitted after install?\u003c\/strong\u003e Yes. The kit is specifically designed to work around the fuel tank. It does need to be removed during installation.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I keep my factory upper arms?\u003c\/strong\u003e Yes. The dropped brackets are designed to accommodate the factory upper arms.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the lower arms to adjust pinion angle?\u003c\/strong\u003e You can, but we don't recommend it — and this applies to factory lower mounts too. Adjusting pinion angle via the lower arms also moves the diff location. Instead, use the lowers to set diff location (to tuck the tyre into the guard) and the uppers to set pinion angle. That approach gives the best results.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI only have a 3\" lift — is this kit worth doing?\u003c\/strong\u003e Yes. We base all of our geometry figures around 3–4\" of lift.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eI have a 6\" lift — will I still benefit?\u003c\/strong\u003e Yes, but we can't stress this strongly enough: anything above 4\" of lift is working against your vehicle. We strongly recommend lowering it for better results all round.\u003c\/p\u003e","brand":"Rampt Customs","offers":[{"title":"DFI 3PC","offer_id":50657427751104,"sku":null,"price":2275.0,"currency_code":"AUD","in_stock":true},{"title":"FK USA","offer_id":50657427783872,"sku":null,"price":2475.0,"currency_code":"AUD","in_stock":true},{"title":"MOUNTS ONLY","offer_id":50657427816640,"sku":null,"price":690.0,"currency_code":"AUD","in_stock":true},{"title":"BUSH\/BUSH","offer_id":50657427849408,"sku":null,"price":2590.0,"currency_code":"AUD","in_stock":true},{"title":"UPPER LINK DROP BRACKETS ONLY","offer_id":50657427882176,"sku":null,"price":305.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/0611\/3728\/files\/7QJCTTF2ZQHM6FWDMQAF3YBF.jpg?v=1793453879","url":"https:\/\/ramptcustoms.com.au\/products\/80-105-land-cruiser-rear-long-arm-kit-corrected-suspension-geometry","provider":"Rampt Customs","version":"1.0","type":"link"}