80/105 LandCruiser - Knuckle Gussets

80/105 LandCruiser - Knuckle Gussets

$55

Pay in 4 interest-free instalments with Afterpay · Zip available

AvailabilityIn-stock orders dispatch in 1–3 business days, usually within 24 hours. Not on the shelf? Allow 1–3 weeks.
Not sure what you need?Call 0421 382 071 — tell us your vehicle, lift and how you use it.

Are you regularly putting your LandCruiser through its paces? Or are you looking to bulletproof your front axle? Here at Rampt, we have the solution for you!


Knuckle gussets are a great product, eliminating the risk of permanent damage to your front axle by bracing the weakest point on the axle housing: the neck-down between the radius arm mounts and the knuckle ball. Even better, our Knuckle Gusset Kit is a little different to the others in the best way possible!


WHY CHOOSE OUR GUSSETS?

Instead of a single chunky 10-12mm plate welded to the bottom of the knuckle ball, this kit is designed to give maximum support for the axle housing. The two-piece-per-side lower plate design is unique to our kit. Once these are welded together, this design offers far more bend resistance than conventional gussets. Additionally, these have been designed to act as more of a skid plate, rather than creating a hang up point like the other kits out there.


These plates brace between the knuckle ball and radius arm mounts. For additional bend resistance and strength, pair this kit with our '80/105 LandCruiser - Front Top-Mounted Axle Truss Kit', or alternatively it can be found as part of a discounted bundle in our '80/105 LandCruiser - Front Axle Brace Kit' listing.


KIT INCLUDES:

-x2 6mm Driver Knuckle Gussets

-x2 6mm Passenger Knuckle Gussets


PLASMA CUT PARTS

Plasma cutting will leave a thin layer of nitride on the cut edge of the plate. To assist with obtaining the best possible weld on construction, this layer of nitride needs to be cleaned or ground off. If not cleaned up it can be similar to welding over thin paint. All welded options ordered are cleaned in house before welding, and we suggest doing the same with flat pack orders.


**PLEASE NOTE**

-If using this kit in conjunction with our weld on Radius Arm Brace Plate Kit, trim 6mm off the ends to fit.

-If using this kit in conjunction with aftermarket radius arms, the inside edges of the plates will need to be trimmed to suit.

-Be ready to change your inner axle seals after installing this kit. Due to the heat from welding, your seals will be destroyed and will require replacement.


*We offer in house install on all our brace/gusset kits if you require. Hit us up for a quote.*


Not sure if this product is right for you? Please email the Rampt team at info@ramptcustoms.com.au to enquire.

Complete the setup