80/105 Landcruiser - Race Series Steering Arms

80/105 LandCruiser - Race Series Steering Arms

$665 $700 Sale

Pay in 4 interest-free instalments with Afterpay · Zip available

Type DRAG LINK WITH FK
AvailabilityMade to order. Allow 1–3 weeks for production.
Not sure what you need?Call 0421 382 071 — tell us your vehicle, lift and how you use it.

7075 Alloy extreme duty upgraded steering arm kit.

This is our "RACE" series steering arm kit, designed for winch trucks, fast cars and hardcore wheelers!

1.75" 7075 T6 solid alloy and 7/8 FK heims for the ultimate in strength, whilst offering a huge weight saving in comparison to the chromoly equivalents.

Good luck bending them! In fact, we'll offer a lifetime guarantee against failure on the material. Wanna be the first to bend one?

Available with either DFI 3pce or FK USA heim joints!


***PLEASE NOTE:

-Installation of the Tie Rod will require drilling your couplings to 3/4" (19mm). This enables a 3/4" bolt to be used in conjunction with the 3/4" cone washers, eliminating the weakest part of the tie rod itself, which is the bottom of the taper of the TRE. The bolt size is upgraded from 14mm to 3/4".


-We use a full-sized bolt for our Race Series Drag Links. This is an upgrade from the factory thread size of 14mm to 16mm. To be able to achieve enough working angle on the drag link, misalignment spacers are required in the heims. The factory coupling holes are tapered, and unfortunately a 16mm drill will not remove enough of this taper. This means the bolt is not fully supported at the mounting surface, creating potential issues such as bolts coming loose, bending or snapping. To counter this issue, we suggest either running our Double Shear kit (available on GU knuckles only), or drilling a larger hole and making an insert to alter the hole size, offering full support for the bolt through the entire height of the coupling.

This is required for both the pitman arm and passenger side swivel housing. (Both ends of the drag link.)



**These arms are not a stocked item. Made to order. Please allow 1-3 weeks for production.


Included: (option dependent)

1.75" 7075 T6 Steering arm/s (Left and Right hand threads)

7/8" FK Heim joints

16mm Misalignment spacers (Drag Link)

3/4" Cone spacers (Tie Rod)

3/4" Hardware for tie rod only


Disclaimer

These steering arms are designed for hardcore off-road, competition and race vehicles. It is up to the customer to obtain the advice of their local automotive engineer for any further use of these arms. Rampt takes no responsibility for the misuse or misinterpretation of the designed use of this product.



What is 7075 Alloy?

This particular material has been proven around the world in rock crawlers, Ultra4, rock bouncers & other motorsports for its strength & resistance to bending, whilst remaining very lightweight.

7075 has a memory characteristic, meaning it will flex & return to straight in extreme situations, whilst still retaining its strength.

Complete the setup