GQ/GU Patrol - Weld-On Front Diff Guard – Housing & Crown Wheel Protection
Pay in 4 interest-free instalments with Afterpay · Zip available
GQ/GU Patrol Weld-On Front Diff Guard
Dedicated protection for your front housing and crown wheel.
A purpose-built weld-on guard that shields the most vulnerable part of your front differential from rock and terrain strikes on the trail. The profile is shaped to double as a skid surface, helping the vehicle glance over obstacles and maintain forward momentum rather than hanging up on the pumpkin.
Construction
- Laser-cut and CNC-folded 6 mm mild steel
- Two-piece design, supplied fully welded and ready to install
- Includes a 4 mm radius arm brace for the inner driver's-side mount
The radius arm brace serves two purposes: it allows a complete weld around the guard, and it reinforces the driver's-side radius arm mount, an area prone to fatigue over time.
Clearance
Our testing shows no clearance issues between the Panhard rod and the top of the guard. As every build differs, we recommend confirming clearance on your own vehicle. For reference, the top of the guard sits:
- 45 mm below the centre of the filler plug
- 25 mm forward of the pumpkin, measured from the crown wheel position (the furthest-forward point of the pumpkin)
Important — check your radius arm setup before ordering
Due to the integrated radius arm brace, this guard is not compatible with vehicles running plates on the outside of the radius arms — i.e. 5-link or Hyperflex setups. Superflex setups are compatible, as those plates are located on the passenger side only. A revised version to suit 5-link and Hyperflex applications is currently in development.
Fitment note
No two housings are identical. While we take every measure to achieve the most accurate fit possible, factory variation — oversized welds, differences in pressed components and similar — is beyond our control. Some minor trimming may be required for a precise fit. Our parts are intentionally designed with a small amount of surplus material to dress back, rather than a gap to fill.
Frequently asked questions
Does it come welded or as a flat pack? It is supplied as a two-piece design, fully welded and ready to install onto your housing.
Will it clear my Panhard rod? In our testing, yes. As a guide, the top of the guard sits 45 mm below the centre of the filler plug. As no two setups are identical, we recommend confirming clearance on your own vehicle.
Will it fit my 5-link or Hyperflex setup? No. The integrated radius arm brace is not compatible with plates mounted on the outside of the radius arms. Superflex setups are compatible. A version to suit 5-link and Hyperflex applications is in development.
Why might trimming be required? Factory housings vary in weld size and pressing shape. We design with a small amount of additional material so the part can be dressed back for a precise fit, rather than leaving a gap to fill.
Pick up free from our Cardiff workshop, or choose delivery at checkout. Courier rates are worked out by weight and state. Kits, large items and orders over 50 kg are quoted once your order is packed, and ship once freight is paid. Smaller parts go by courier: QLD, NSW, VIC, SA & TAS 2–4 days, WA & NT 5–10 days. Large kits go by pallet to your nearest depot. Physical addresses only.
Change-of-mind returns within 30 days of shipping or collection, subject to a 20% fee. Made-to-order and custom parts excluded. Your rights under Australian Consumer Law are unaffected.
We ship worldwide. Email your address, phone number and parts list and we'll come back with a freight quote.
Complete the setup


Sale
Sale