Kartek Adjustable Limit Strap Clevis - 1/2" Shank (Holds Up To 3 Straps)
Fits Universal - race and custom builds

Kartek Adjustable Limit Strap Clevis - 1/2" Shank (Holds Up To 3 Straps)

$65

Pay in 4 interest-free instalments with Afterpay · Zip available

AvailabilitySupplied through Hillfab and not always in stock. We'll confirm availability and dispatch time after you order.
Not sure what you need?Call 0421 382 071 — tell us your vehicle, lift and how you use it.
Limiting strap length is measured from center of bolt hole to center of bolt hole. The bolt holes are 9/16" in diameter.

Limiting straps are ideal for any off road application since they are vital in preventing damage to your suspension and drive train components. Without limiting straps, your shocks act as stops at maximum droop which can cause damage from your vehicle's unsprung weight. Limiting straps also prevent damage to your CV's by limiting the amount of maximum angle on your axles. The limit straps we carry are four-ply so only 1" of stretch is allowed for every 12" of strap. Chromoly Chrome-Moly Chrome Moly



If you're going to use an adjustable clevis then you'll need to compensate for the extra length of the clevis. See clevis diagram. An adjustable clevis allows you to fine tune your suspension and it also allows you to shorten the distance as the strap stretches over time.

You want to make sure that you double shear the bottom of the limiting strap mount for extra strength. Ideally, you would use a grade 9 bolt such as f911. The tab on the limiting strap and the tab that you weld to the chassis should always be lined up in the direction the limiting strap is going to pull. You never want to mount the tab "flat" to a surface because it will bend and eventually fail.

Good to know: Not sure it suits your build? Talk to the Rampt team before you order and we'll help you work it out.

This part is supplied through Hillfab.

Complete the setup