N50/N60 Hilux - Rear Wrap Bar
Pay in 4 interest-free instalments with Afterpay · Zip available
Now lets get one thing straight, there is absolutely nothing wrong with leaf springs! They still have the ability to party just like any other set up, but there is a few tricks you can do help them get a bit more boogie on!!
Thus we have our N50/N60 Toyota Hilux Rear Anti Wrap Bar set up!
One common downside to the old bendy flat bar set up is its inherent ability to allow the diff to rotate under torque. This rotation is what's called axle wrap! The thicker and sturdier the leaf pack, the less this wrap will occur. But if your playing with the flexy pirate planks then you'll know that less and/or softer leafs is what helps obtain that desired travel. The by product of softer means more wrap.
Why is wrap bad?
Put very simply, it puts excessive stress on the leafs, and more importantly, drastically hinders your traction! Now we're not talking about flicking your lockers on kinda traction. We're talking how your chassis responds to torque kinda traction. This mentality is one of the main reason rock crawlers/buggies can drive such gnarly terrain and make it look like the coles carpark.
With the diff trying to wrap, its like a big dead spot in your steering where absolutely nothing is happening until the slack is taken up. Your swinging of the wheel but nothing is turning. This is similar to what wrap can cause, you press the onion pedal, nothing happens until the wrap reaches its peak, then the tyres start to turn. But this also means the suspension is not grabbing for traction like it should, as well as trying to jack the car off the ground. Ever driven a rut/step and felt like the rear end is trying to turn into a jack hammer and start bouncing? This is a by-product of axle wrap. And this anti wrap bar can help tame it all!
Designed to be fully adjustable in wheel base and pinion angle, this kit will suit any lift height or leaf set up.
Additional pivot point for lower link means adjustment to suit pinion angle changes, and offers less bind through travel.
Shackle on the chassis to account for difference in movement.
Quality 7/8 DFI 3pce heims.
Whiteline urethane bushes in threaded housings.
45mm OD 6mm walled hollow bar for the links.
Easy fit chassis and diff mounts.
All new mounting hardware.
Optional full Flat Pack or fully Welded.
If welded, links can come optional powder coated as well. (coating colour magnetic grey standard)
Kit is reversable to go on either side of the chassis if required.
Fits all LN106 and LN167 model Hiluxs. May suit other vehicles, please reach out if interested.
Pick up free from our Cardiff workshop, or choose delivery at checkout. Courier rates are worked out by weight and state. Kits, large items and orders over 50 kg are quoted once your order is packed, and ship once freight is paid. Smaller parts go by courier: QLD, NSW, VIC, SA & TAS 2–4 days, WA & NT 5–10 days. Large kits go by pallet to your nearest depot. Physical addresses only.
Change-of-mind returns within 30 days of shipping or collection, subject to a 20% fee. Made-to-order and custom parts excluded. Your rights under Australian Consumer Law are unaffected.
We ship worldwide. Email your address, phone number and parts list and we'll come back with a freight quote.
Complete the setup

Sale
