Rampt 80/105 front torsion bar sway bar fitted
Fits Toyota 80 & 105 Series LandCruiser

80/105 LandCruiser - Front Torsion Bar Sway Bar

$2,300

Pay in 4 interest-free instalments with Afterpay · Zip available

  • Won't limit wheel travel like a factory bar
  • Tuneable — 3 bar rates × 3 arm positions = 9 settings
  • Works with flipped or flexy radius arms
  • CNC cut 12 mm steel arms, 7075-T6 alloy links
Model 80 Series
Bar Rate Soft
AvailabilityNot always a stocked item — contact us for availability before ordering.
Not sure what you need?Call 0421 382 071 — tell us your vehicle, lift and how you use it.

Flipped your radius arms and can't make the factory sway bar fit? Running different or flexy radius arms and want to stop the feeling that you need to drop a knee around corners — without hindering off-road performance? We have the solution, and the outcome will surprise you.

Introducing our 80/105 Front Torsion Bar Sway Bar. This weld-in kit will outperform any factory front sway bar setup you might have, or anything else on the market.

How it works

Torsion bar sway bars work similarly to torsion bar IFS setups — except IFS setups are holding the weight of the vehicle. A high-sprung, splined steel bar works left to right across the chassis, with arms running along the chassis and links down to the diff housing. As the front diff flexes, each arm moves in the opposite direction, twisting the bar. The sprung steel resists that twist, giving resistance to movement at the diff housing.

The advantage? Not only will the bar not limit wheel travel — it's also tuneable in how firm or soft you'd like it to respond.

Tune it your way

The bar is available in three thicknesses: soft, medium and heavy. (For the majority of touring vehicles, a medium bar is your best bet.) The arms also have three mounting locations, giving more or less leverage over the bar to dial in the resistance you're after — that's a potential nine different settings.

Built properly

Sway bar arms are CNC cut and folded 12 mm steel, powder coated satin black as standard (custom colours on request). Both arms are folded to sit as tight to the chassis and steering box as possible without contact. Left-hand drive owners don't fret — the arms are mirrored, so they'll work for you too.

Links are CNC machined 1" solid 7075-T6 alloy with DFI 3-piece 5/8" heims, with left/right threads for fine length adjustment.

Easy install

Chassis mounts are extremely easy to install. The centre plate locates via the threaded hole on the crossmember, setting the forward/back location of the bar mounting tube, and the side chassis tabs align off the front body mounts (a quick tape measure to check alignment before the final burn-in). Diff mounts weld onto the side of the panhard mount and onto the sub-structure of the lower coil mount.

Worried about the single-shear setup? Your road car won't allow full use of shocks long enough to put enough tension on the bolts to shear them.

Specifications
InstallWeld-in kit
Bar ratesSoft, medium or heavy (medium suits most touring vehicles)
Arm adjustment3 mounting positions
ArmsCNC cut and folded 12 mm steel, satin black powder coat
Links1" CNC machined solid 7075-T6 alloy, LH/RH thread
HeimsDFI 3-piece 5/8" with misalignment spacers
Mounting kitsCNC cut 6 mm steel (80 and 105 use different side plates)

Complete the setup