80/105 LandCruiser - Rear Panhard Riser
Pay in 4 interest-free instalments with Afterpay · Zip available
- 100% bolt-on — no cutting, grinding, drilling or welding
- Raises the rear panhard mount 3" for a more level panhard
- Less body roll, no more rear-end wiggle over bumps
- Powder coated satin black (custom colours on request)
This bolt-on bracket is designed for the 80/105 LandCruiser rear panhard mount. It bolts to the original mount on the rear diff housing and the passenger-side upper control arm mount — no cutting, grinding, drilling or welding required.
The bracket gives your panhard two new mounting locations:
- Position 1 — 3" higher, 1" longer. Accepts the factory Toyota panhard bush. The vehicle must run an aftermarket adjustable panhard to centre the diff, as the factory panhard is too short for the new location.
- Position 2 — 3" higher, 4" longer. For our extended 7075 alloy bush/heim panhard, available with the bracket or on its own at any time.
On road
You'll notice the benefits immediately. On-road manners are drastically improved — smoother, more stable and more predictable — and body roll is greatly reduced, making the car much more comfortable to drive. Over speed humps and rough roads the rear diff travels with far less lateral movement, because the panhard starts from a more level position. The rear end stays firm and straight, drastically reducing that "rear-end wiggle" you feel in lifted vehicles.
Off road
The raised roll centre changes how the rear end performs through its cycle and how the sprung weight reacts to gravity and torque. In simple terms, the vehicle feels more stable and predictable, with less body roll and unloading on side angles, because gravity has less leverage over your car.
The extended panhard
Add our extended panhard and you get all of the above, on the next level. It moves the roll centre to the centre of the vehicle, so the suspension pivots from the middle for a much more neutral feel — and it helps stop the passenger front wheel lifting under torque. Try balancing a piece of steel 2" off its centre: that's what's happening to the rear of your cruiser. The extended panhard puts the balance point right smack bang in the middle.
Like our front panhards, the extended rear panhards are made from 1.5" (38.1 mm) 7075-T6 solid alloy, with 7/8" DFI 3-piece heims or FK rod end heims and Whiteline poly bushes. The panhard is bind-free through its working motion — the heim takes care of misalignment while the bush absorbs forces as normal.
Our guarantee: we're so confident in this product that if you aren't blown away by how much better your cruiser handles after installing it, return it for a full, no-questions-asked refund — providing it doesn't look like it's been dragged across rocks or flogged with a hammer.
Powder coated satin black as standard. Custom colours on request, at additional cost.
Suits all lift heights, with the best results at a maximum 3–4" lift — the height where the suspension geometry is happiest.
An aftermarket adjustable panhard is required to centre the diff, as the new mounting position is an inch further across.
Torque the M18 factory-location panhard bolt and the M16 bolt through the upper link mounts to 70 Nm only. The new panhard location bolt can be torqued to factory spec.
Realign the rear diff after install — measure from two reference points on the chassis to the tyre before fitting, then match after.
It is your responsibility to check clearance with your particular setup.
Will it affect handling on vs off road?
Yes — but not in any negative way. You'll get more car-like characteristics on road, and more stability off road.
Will it affect flex?
Not at all. The only thing it changes is how your flex rotates, which helps reduce tyre scrub on guards if you have any.
Will my brand of panhard suit?
Any aftermarket panhard will suit — the only stipulation is it must be adjustable, because the new mounting position is an inch longer.
I only have a 2–3" lift. Will I see a benefit?
Yes — you'll actually see a better outcome on a smaller lift than on a 4–6" lift.
Do I need to realign the rear diff after install?
Yes, and it's easy: measure from two points on the chassis to the tyre before install (some find the diff was slightly out to begin with), then match it after.
Is the extended panhard worth it over the shorter one?
100% yes — it moves the roll centre to the middle of the vehicle for an even more neutral feel.
Pick up free from our Cardiff workshop, or choose delivery at checkout. Courier rates are worked out by weight and state. Kits, large items and orders over 50 kg are quoted once your order is packed, and ship once freight is paid. Smaller parts go by courier: QLD, NSW, VIC, SA & TAS 2–4 days, WA & NT 5–10 days. Large kits go by pallet to your nearest depot. Physical addresses only.
Change-of-mind returns within 30 days of shipping or collection, subject to a 20% fee. Made-to-order and custom parts excluded. Your rights under Australian Consumer Law are unaffected.
We ship worldwide. Email your address, phone number and parts list and we'll come back with a freight quote.
5.0 from 14 reviews
Absolutely awesome, it drives like a brand new car now, stability feels so good now!
This has been the best value for money modification I’ve made. Way better handling over bumps and much flatter cornering. Best quality went top of the wozza FK heim and couldn’t be happier.
Item was as advertised and fitted as designed, top job Benji.
Unreal product, changed my whole cars on road behaviour, a need to do mod. Benji also a great help
Great product. The car drives so much better around windy and bumpy roads.
Awesome bit of gear, fitment was spot on and the handling of the car was night and day difference. Anyone who is thinking about getting one don't hesitate to buy!
Great product fit perfectly took me about one hour to fit from start to finish the car rides much better and feels safer to drive
Awesome Product! I have a 4” lift and this bracket has greatly reduced the real wheel steer and body roll to hardly any, now handles as it should. Less than 30mins to install. If you are thinking if this is worth it, don’t hesitate and buy one.
Master piece , very happy with this item , amazing quality delivery was on time communication was the best with the guys , well done guys 👍👍
I brought this bracket for my sons 80 series after fitting one to mine. This difference was instantaneous as it was for my 80, I can't stress enough how much difference it makes on a 4 inch lift. They drive like a car!!!!!! We are both stoked and want to thank the team at Rampt for their awesome products. Keep up the good work. Cheers, Sean & Ben
Was a little sceptical in all honesty but 100% lives up to the hype. Chopped dual cab 80 with tray and canopy loaded up for touring and the difference is huge. Feels like it lost a ton. Lighter handling, sits firmer and definitely less body roll. Pricey bit of kit but worth every cent
Great product and service, highly recommend 👍 Ordered online and received no dramas.
Best thing I have ever purchased as soon as I fitted it I took it for a test drive and could feel the difference straight away. I kid you not it felt better instantly. I then drove 1.5 hrs out to work on a very questionable peak downs highway and it sat on the road like a car even thou its lifted 4 inches.
Nice quality piece, fits real easy, fast postage dispatch and somewhat reasonable pricing. Very happy so far so cheers. 👍
Complete the setup


Sale
Sale